COCOON 550

  • Wherever it is sprayed, COCOON 550 will form a tough, flexible, waterproof skin that will withstand the extremes of temperature, thermal shock, differential substrate movement, and impingement.
  • Formulated for protection of exterior surfaces subject to mechanical stresses, impact, and harsh climatic conditions.

 

> FULL PRODUCT INFORMATION

Category: Tags: , , Product ID: 2160

Description

PDF FORMS:  DATA SHEET,  SDS

Description

COCOON 550 is formulated for protection of exterior surfaces subject to mechanical stresses, impact, and harsh climatic conditions. COCOON 550 is a liquid polyvinyl chloride coating which can be sprayed on any clean, dry building surface. Wherever it is sprayed, COCOON 550 will form a tough, flexible, waterproof skin that will withstand the extremes of temperature, thermal shock, differential substrate movement, and impingement. COCOON 550 is used extensively on promenade decks, traffic bearing roof decks, and mechanical room floors where its excellent abrasion, waterproof, scuffing, and traction enhancement properties are important.

Outstanding Features
  • Excellent protection to exterior surfaces, including roofing and structural decks, to effectively waterproof and seal against moisture presentation
  • Tested by Factory Mutual for combustibility and found to be a fire retardant coating that will inhibit the progress of combustion
  • Cocoon has been in practical architectural use for over 50 years
  • Approved by the Board of Standards and Appeals of New York City (795-57-SM) for use as a roof covering on hospitals,  schools, institutions, commercial and industrial buildings
  • Unaffected by intermittent exposure to dilute solutions of alkalies including sodium hydroxide, sodium carbonate, and ammonium hydroxide
  • Resistant to exposure to most strengths of mineral acids at ambient temperatures and to all concentrations of salt solutions, alcohols, and greases
  • Weathering characteristics permit the use of many different pigments and pigment blends to produce a wide variety of colors possessing excellent stability
  • Chemical structure permits infinite touch-up and recoating window (new Cocoon coat softens the old coat and “bites in” to offer provision for future maintenance work)

Coverage

Approximate 1 gallon per 100 sq ft/gal per coat x 4 coats

Container sizes

5 gallon

Color

White

Technology

Polyvinyl Chloride Solution

 

Preparation and Application

Surface Preparation
All surfaces must be dry, free of dirt, loose debris, oils, grease, or any substance that could interfere with adhesion. Additionally, all surfaces should be modified in a manner to make them as smooth as possible by removing sharp projections and filling gaps and voids

Application

All masonry, cement and concrete must be allowed to cure for 30 days or measure 15% maximum on the moisture meter. Ambient temperature in the work area must be at least 55°F. Additionally, all surfaces should be modified in a manner to make them as smooth as possible by removing sharp projections and filling gaps and voids. A minimum surface profile of 1/mm should be maintained for maxi-mum adhesion. After proper masking, prime the entire surface to be coated with Vinyl Bond B, directly from the can by spray or roller, and allow the primer to dry. Close all penetrations through the surface by using a webbing coat. Webbing solution is made by mixing 1 part webbing agent with 3 parts Cocoon 550 to produce a milky, white solution that will support the following coats. Mix ½ gallon of Cocoon Pigment into a 5 gallon can of Cocoon 550 and mix until the color is uniform. Spray apply the mixed Cocoon 550 in multiple overlapping passes until a 20 mil dry film thickness has been achieved. Properly applied, the coating should be free of voids and pinholes. Voids and pinholes must be re-sprayed to achieve a complete seal. Prior to the removal of any protection or equipment, a thorough inspection of the entire area should be completed and all damage or deficiencies must be repaired and re-sprayed. All termination joints should be sealed with a polyurethane sealant. For recommendations regarding equipment, contact our Technical Department.

Recommended Thickness
3 to 5 mils Dry Film Thickness (DFT)

Cocoon Spraying Instructions >

Drying Time
About 5 minutes per coat

Clean up
Equipment may be cleaned with Acetone

Storage
Store in a dry area and protect from direct sunlight and freezing. Protect from moisture and foreign materials. Keep container tightly sealed. Shelf life is 2 years from date of manufacture when stored in a factory sealed container between 50ºF (10ºC) and 90ºF (27ºC).

Disposal
Waste disposal must be in accordance with existing federal, state and local environmental control laws. Incineration is the preferred method of disposal.

Read the container label warning and Safety Data Sheet (SDS) for important health and safety information prior to the use of this product.

KEEP AWAY FROM CHILDREN AND PETS

For additional information, contact the Andek Technical Department

 

Technical Data
VOC  254 gms/liter
Moisture Vapor Transmission  0.06 perms ASTM E-96
Tensile Strength 900 psi ASTM D-412
Elongation 150% ASTM D-412
Flexibility at Low Temperature 180 deg. bend @ -35°C ASTM C-711
Shore ‘A’ Hardness 75 degrees ASTM D-2240
Weatherometer (1000 hours) 85 gloss ASTM G-23
Viscosity 55 ku ASTM D-446
Total Solids 34% (B.W.); 28% (B.V.) ASTM D-1044
Flashpoint
+0°F FTMS 141A (M4293)
Fire Resistance
Self-extinguishing
Abrasion Resistance
36.5 mg loss (T.W. @ 1000g/100-rev)