Andek Firegard
Andek Firegard

ABOVE LEFT: Spraying 2.6 lbs density urethane foam around a high temperature vent over a furnace prior to installation of Andek Firegard. ABOVE RIGHT: Andek Firegard may be applied by brush in difficult to reach spaces.

Andek Firegard
Andek Firegard

ABOVE LEFT: Urethane foam over large ducts may be protected by Andek Firegard even in hot, humid spaces. ABOVE RIGHT: Andek Firegard provides an impact resistant coating over all types of insulation and enhances its performance while providing fire resistance.

BEFORE
AFTER
Andek Firegard Andek Firegard

These tanks were primed with Andek Polaprime 21, then covered with 3" of high temp. foam, and finally coated with Andek Firegard sage green.

BEFORE
AFTER
Andek Firegard
Andek Firegard
   
Andek Firegard
Andek Firegard

The owners of these tanks needed to store very hot liquids. The tanks were first primed with Andek Polaprime 21 and then covered with 3 inches of Demilec high temperature 218 spray-applied foam. This was followed by 20 mils of Andek Firegard. The contractor who applied the foam and coatings was Future Insulation, who has insulated over 500 tanks in the last 20 years.