Rubberkote 1047

RUBBERKOTE 1047 is a revolutionary waterproofing coating that is uniquely designed to be applied to wet or damp roofs where curing will proceed even underwater! Yet unlike quick patch materials that have a short life expectancy, Rubberkote 1047 is guaranteed to last for five years! Rubberkote 1047 will adhere to all common roofing substrates and is ideal for either instant roof repairs or as a permanent roof coating. Rubberkote 1047 may be topcoated with any of our Polaroof materials for a custom colored finish.

OUTSTANDING FEATURES:

§ Can be used over BUR, capsheet, modified, steel, aluminum, tin, zinc, concrete, transite, and others

§ Stops leaks instantly and can be applied under water!

§ Produces a fully adhered, seamless, high density, waterproofing membrane

§ Remains flexible, tough and weatherproof at low temperatures and will not flow at high temperatures

§ Apply straight out of the container by brush or roller

§ Uses DuPont Kevlar® technology to achieve super strength and durability

§ May be used on vertical, pitched and horizontal surfaces and withstands ponding water

§ Will not re-emulsify or wash away with rainwater

§ Ideal accessory for all repair kits

§ Warrantied for 5 years

Although only minimal preparation is required, all loose material, stones and grease should be removed, together with as much dust, rust and standing water as is reasonably possible. All holes, gaps and joints should be bridged with Roofab sandwiched between sufficient RUBBERKOTE 1047 to provide thorough wetting of the roof surface and thorough saturation of the Roofab. This is best accomplished by "stippling in" with a brush. RUBBERKOTE 1047 may be applied in 2 coats of 20 wet mils thickness each over capsheet, modified, metal, transite or concrete after the above preparation is complete. The 1^st coat may be applied directly over any fresh, wet repairs as curing will proceed regardless of thickness although slower. The 2^nd coat may be applied as soon as the 1^st coat is sufficiently dry to walk on (normally 2-3 days at 65°F). Care should be taken not to disturb any patches or pre-treatments as they may still be wet. RUBBERKOTE 1047 may be applied over asphalt or coal tar B.U.R. after the preparation described above has been completed. The 1^st coat should be applied at 66 square feet per gallon; Roofab laid into it and thoroughly “stippled in” by brush with a 2^nd coat at 66 square feet per gallon to remove all tents and voids. The Roofab should be overlapped as indicated by the lap lines and thoroughly saturated with RUBBERKOTE 1047 so that no dry spots remain.

Contains solvents. Read M.S.D.S. thoroughly before using. Do not get on skin or in eyes. Do not ingest or inhale vapor. Make sure that vapor does not enter building. If skin is contaminated, use suitable cleaner. If eyes are contaminated, wash with water and seek medical attention. If ingested, do NOT induce vomiting and seek immediate medical attention. If inhaled, remove person to fresh air.

NOTICE: The information presented herein is based on tests and data that Andek Corporation believes to be reliable. It is intended for use by technically qualified personnel at their own discretion and risk. Since conditions of handling and use are beyond our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be construed as a license to operate or a recommendation to infringe any patent.