Copyright Andek Corporation 2005.  All rights reserved.
 

 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 

 

 
   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   
These pictures show a nice even fan.

The following pictures give an idea of the minimum equipment needed to spray most of Andeks coatings.

     
This picture shows a Graco GMAX 5900 which at 5900 max psi is the minimum requirement for spraying Andek coatings. Some of the coatings require far greater psi, please refer to the product data sheets for each product., or call the technical service department.                                         

Here, the pump is on and the hose is being primed.

 

  
     
Here we see that the pump and hose have been primed and the gun is ready to have the tip fitted.

 

 

 

  
     
This particular gun has a trigger lock, seen in the center of the picture to prevent potentially dangerous accidents. Simply twist the safety vertical to use the gun.

 

 

  
     
Different size tips can be used to adjust the spread or fan and help adjust the volume sprayed and the thickness applied.

 

 

 

  
     
 

 

 

 

  
     
An extension can be added to the nozzle to make spraying upright more comfortable. The thickness of the applied coating can be measured with a WET MIL GAUGE.