This page gives a brief description of Andek Flooring & Deck Products. Please click on the product name below to go to a detailed product data sheet.
Water-based, single component, acrylic primer designed for porous masonry and asphalt based surfaces.
Single component urethane primer that is highly effective over oxidized steel, new mild steel, and other metallic surfaces. It chemically reacts with the substrate to promote superior adhesion of the coatings to be applied.
POLAJOINT provides protection for wide cracks and joints. 100% solids, pourable, two component epoxy that cures to form a semi-hard, durable, joint compound. POLAJOINT has a fast cure time, good chemical resistance and high impingement resistance.
100% solids, two component urethane that forms a flexible and highly durable joint compound. POLAJOINT SUPER offers excellent chemical resistance to solvents, corrosive oils and salts
Acrylic-based color coating and protective wear surface. POLAFLOOR COLORCOAT produces a surface that is water-repellent and wear resistant for most commercial and industrial requirements. POLAFLOOR COLORCOAT is water-based, with low odor, and is fast drying. Available in a range of attractive architectural colors, it comes in either smooth semi-gloss or textured, traction-enhanced finishes
WEARCOAT 44 is a two-component, aliphatic urethane coating that produces a tough, glossy, hard-wearing and chemically resistant surface. Abrasion-resistant and UV stable, WEARCOAT 44 will protect and beautify a variety of interior and exterior substrates. If specified, a range of textured aggregates is available to provide a traction enhanced surface.
WEARCOAT 66 is a color-fast cyclo-aliphatic urethane-based coating.  It produces a tough, high gloss, hard-wearing and chemically resistant surface for the protection of urethane and polyester composites, concrete, masonry, and over approved substrates.
CLEARCOAT 44 is a single component, moisture cure, aliphatic clear urethane coating.  It produces a tough, glossy, hard wearing and chemically resistant surface.  CLEARCOAT 44 may be used alone as a clear, tough gloss coat over masonry, concrete, wood, or other approved substrates. If specified, a range of textured aggregates is available to provide a traction enhanced surface.
CLEARCOAT 66 is a clear single component, moisture cure, aliphatic urethane coating.  It produces a tough, glossy, hard wearing and chemically resistant surface.  CLEARCOAT 66 may be used alone as a tough gloss coat over concrete, wood, fiberglass composite, or other approved substrates.
CLEARCOAT AQ is a single component, waterborne aliphatic urethane that produces a clear, tough, crack resistant protective gloss coating.  It has excellent adhesion properties and produces a film that is hard, flexible, and chemically resistant.  CLEARCOAT AQ has excellent resistance to UV, abrasion, oxidation, humidity, impact and solvents. CLEARCOAT AQ has low toxicity and meets all VOC regulations.
Single component polyurethane coating especially designed to protect industrial concrete floors. It produces a surface that is very abrasion-resistant and is unharmed by most industrial chemicals. It cures to an attractive semi-gloss finish and is available with the choice of aluminum oxide granules or sharp quartz aggregate to provide a highly traction-enhanced surface.
High strength floor topping used to provide extreme resistance to wear, impact and chemical attack. It may be used to patch holes or cover and level process areas in chemical plants, machine shops, plating works, breweries, and other areas requiring high durability and low maintenance. It produces a uniform, slightly granular surface that is available in a select range of colors.
Combines the properties of silicon carbide, Kevlar®, and urethane chemistry to produce an ultra-high performance, engineered coating. A three-part urethane floor coating, it is designed for the most severe interior and exterior service. It has exceptional resistance to most industrial chemicals and provides a tough, wear-resistant surface that resists impact and abrasion.
AIM #1 is a liquid-applied urethane that forms a very tough high performance elastomeric coatings. It is used as a buried membrane to protect and waterproof concrete slabs, gulleys, tile, pipes, chemical containment areas, and washout basins. AIM #1 possesses exceptional elasticity and is resistant to environmental attack and exposure to a wide variety of industrial chemicals.
AIM#3 is a highly effective, liquid-applied, protective, rubber based vapor barrier coating that waterproofs and seals building foundations and below grade construction. It is highly resistant to sulfates, soil contaminants, bacteria, and other environmental conditions. Designed for permanent flexibility and strength, AIM #3 provides long lasting waterproof and vapor proof protection.
NW 'Z' GRADE is a tenacious waterproofing coating designed especially for concrete and wood decks, walkways and stairways. Using state-of-the-art technology, NW 'Z' GRADE possesses a unique combination of superior strength and waterproofing abilities. It may also be used in marine, off-shore and sports facilities to provide a tough, damage-resistant, protective finish that will remain fully functional and attractive.
Sized and graded sharp, quartz aggregate in a range of colors can be added to any Andek floor or deck coating. The aggregate will instantly add traction enhancement, increased durability and abrasion resistance, and a very professional finish to the completed floor system.
PSI-901 CAULK is ideal for sealing expansion joints and control joints in pre-cast concrete, tilt-up concrete, poured-in-place concrete, metal curtain walls, perimeter caulking (doors, windows, panels, bedding, steps and risers), and glazing.