Description
POLAFLOOR COLORCOAT
Durable Color Finish. Protective Wear Surface. Versatile Performance.
POLAFLOOR COLORCOAT is a high-quality, acrylic-based coating designed to provide a durable, attractive, and protective wear surface for industrial, commercial, and residential applications. It delivers excellent resistance to chemicals, wear, UV exposure, mildew, and alkali conditions while enhancing and preserving the appearance of treated surfaces.
This water-based, low-odor formulation allows for safe, convenient application and fast drying to reduce downtime. Available in a wide range of colors, POLAFLOOR COLORCOAT can be applied in smooth, semi-gloss, or textured finishes to meet both aesthetic and functional requirements, including traction enhancement.
Forming a flexible, long-lasting coating, POLAFLOOR COLORCOAT protects substrates from water intrusion, chemical attack, and surface wear. It is ideal for restoring and protecting wood decks, bridges, concrete floors, and exterior plaster finishes, delivering a low-maintenance, cost-effective solution that combines durability with visual appeal.
Available in 24 standard colors, with custom color matching upon request.
Key Benefits
- Industrial-Grade Durability
Tough, wear-resistant protective surface - Chemical & Alkali Resistance
Withstands harsh environments - UV & Mildew Resistant
Maintains color and performance outdoors - Flexible Finish
Moves with the substrate to resist cracking - Low Odor & Water-Based
Easy to apply and clean up - Fast Drying
Reduces downtime and project disruption - Low Maintenance
Attractive, long-lasting finish
Finish & Color Options
- Wide range of colors
- Smooth finish
- Semi-gloss finish
- Textured, traction-enhancing finish
Typical Applications
- Restoration and protection of wood decks and bridges with a waterproof, durable coating
- Sealing and protecting concrete floors in basements, equipment rooms, and access tunnels
- Coating and waterproofing stucco and exterior plaster finishes on architectural features such as balustrades and porticos
Recommended Substrates
Suitable for application over:
- Concrete
- Wood and wood composites
- Insulation
- Mineral composites
- Other properly prepared surfaces
Coverage & Thickness
- Coverage: Approximately 200–240 sq. ft. per gallon per coat (depending on substrate)
- Application: Typically two coats
- Recommended Thickness: 8 mils dry film thickness
Available Sizes
- 1 Gallon
- 5 Gallon
Technology
- Acrylic co-polymer (water-based)
Surface Preparation
Surface must be firm, dry and free of loose debris, dirt, grease, oil, mildew, or any substance that may interfere with bond. All cracks and spalled or damaged surfaces must be repaired prior to coating.
Application
It is advisable to test previously coated or treated surfaces by applying POLAFLOOR COLORCOAT (and primer if recommended) to a 4’ x 4’ area. After the area has cured, inspect the coating for adhesion, blisters, pinholes, or other signs of incompatibility. It may be necessary to sand or rough some surfaces to improve adhesion.
POLAFLOOR COLORCOAT is applied straight out of the container after 2 minutes of low speed power stirring. POLAFLOOR COLORCOAT is usually applied using a soft brush or roller; however, airless spray may also be used. Two coats are applied at 200-240 square feet per gallon each. For a traction-enhanced surface, add 2-4 pounds of dry broadcast medium aggregate per gallon of POLAFLOOR COLORCOAT. Blend in the aggregate using low speed mixing and roller apply as the second coat. For more texture, increase the quantity of aggregate. Andek can supply the aggregate if needed. For added wear resistance or resistance to ponded conditions, topcoat with CLEARCOAT 44 at 250-300 square feet per gallon.
Spray Application
Utilize a 30:1 airless pump, a 3/8″ moisture hose and a 31 width tip
Recommended Thickness
8 coats yield 30 mils Dry Film Thickness (DFT)
Clean up
Equipment may be cleaned with water while the POLAFLOOR COLORCOAT is still wet.
Limitations
Do not apply to frozen or saturated surfaces. Do not apply if the temperature cannot be maintained above 45°F for 6 hours. This product is not intended for use where standing water exists unless it is topcoated with CLEARCOAT 44. It is advisable to test previously sealed, treated or painted surfaces.
Read the container label warning and Safety Data Sheet (SDS) for important health and safety information prior to the use of this product.
KEEP AWAY FROM CHILDREN AND PETS
For additional information, contact the Andek Technical Department
Technical Data
| VOC | 50 gms/liter | |
| Flashpoint | Non-flammable | |
| Tensile Strength | 1000 psi | ASTM D-412 |
| Elongation | 15% @ 75°F | ASTM D-412 |
| Total Solids Content | 56% (B.W.); 52% (B.V.) | ASTM D-1044 |
| Shore ‘A’ Hardness | 95 | ASTM D-2240 |
| Impact Resistance (4 mm) |
Pass | BS 3900 Part E3 |
| Viscosity | 5000 cps | |
| pH |
9.5 | |
| Density |
Approx 11.8 lbs/gallon |